I-Mate has introduced a mobile phone with lots of innovative features in it. The features in this mobile phone will make every one to get attracted to it. It is the new IMate JAQ-3 Mobile Phone. This is not just a mobile phone but can rather be called as the pocket computer. This has got the operating system of Microsoft windows mobile 5.0 pocket PC edition (Magneto) AKU 3.2. The operating system kernel of this unit is Windows CE 5.1.422.

Central Processing Unit

The central processing unit of this unit is the Texas Instruments OMAP 850. This could browse all the information’s according to the instruments of Texas. The Data bus width in this unit is measured as 32 bit in width. The Central processing unit clock has a speed of 201 MHz. The central processing unit is ARM926EJ-S. This is made assembled with a level 1 cache memory of 8 KB data cache/ 16 KB instruction cache. The instruction set of this unit is ARM v5.

Memory and Display

The random access memory of this unit is of flash ROM. The ROM capacity is 128 MB. The RAM installed in it is under the technology of SDRAM. The RAM capacity is estimated as 64 MB. The display type of this i-Mate JAQ-3 Mobile Phone is the colour transflective TFT display screen. The display colour depth is 16 bit / pixel with 65536 scales. The display resolution of the screen is 320 x 240 pixels. Its diagonal is calculated as 2.4 inches. The viewable area is 2” x 1.5”. The dot pitch in this screen is 0.155 millimetre / pixels. It is a touch screen with QWERTY keyboard, 5 way directional pads and a scroll wheel.

Audio

The audio system of this i-Mate JAQ-3 Mobile Phone is stereo audio, with 16 bit audio sampling. A microphone and a loud speaker with mono type output id also supported. The audio output is 2.5mm.

Other Features

This IMate JAQ-3 Touch Screen Mobile Phone comes under the network frequency of GSM 850 MHz, GSM 900 MHz, GSM 1800 MHz and GSM 1900 MHz. The standards of this unit are CSD, GPRS, and EDGE with an internal antenna. The ring tone supporting of this unit is 64 chord melodies. Vibrating alert, speaker phone is been featured. The SAR value of this mobile phone is 0.856W/kg taken over a volume of 10 grams and the phone controller of this unit is TI TMS320C54x.

Interface

The expansion slots that this unit has got are SDIO, MicroSD and TransFlash. It has serial (UART) RS-232, 115200bit/s. USB connector series of mini-B. Infrared gate and Bluetooth connectivity is also been included. A wireless LAN (Wi-Fi) of standards 802.11b, 802.11g (54Mbit/s) is also supported.

Camera

A camera with CMOS sensor 1.92 pixels that supports an optical zooms of 1x is integrated in this new mobile phone. The image formats are recorded in JPG or BMP file formats. The recordable video formats supported are 3 GPP and MPEG4.

Battery and Dimension

The battery technology used in this device is lithium ion with the capacity of 1200 mAh and an average current of 120 mA. The estimated life is 10 hours. The dimensions of this i-Mate JAQ-3 Mobile Phone are 67.5 x 126 x 14.5 mm and weight is about 160 grams.

Additional features

• GPRS Class 10
• Hands-free
• Voice command
• Built-in antenna

Source: http://www.mobilephonereviews.org